Billets have oxidized layers and defects on their surface due to the production process, so they must be surface?regulated by grinding. There is no special equipment for surface regrinding of large square steel billets; a square steel regrinding equipment was designed. Kinematic simulation verification was completed using ADAMS software. The results show that the regrinding equipment can simultaneously and smoothly complete the grinding operation on two adjacent surfaces. Using finite element software ANSYS to carry out stress analysis and modal analysis of the regrinding machine under load, and improve the structure; according to the simplified kinematic model, static analysis was carried out to get the required input driving torque, and the selection of the critical components of the spring was completed. Theoretical calculations and simulation results show that this regrinding machine can efficiently grind the surface of large square billets.